×Read this message from Erik, founder of YouMagine
8904c64190ed3c9ecbb2e303cf7dd880?default=blank&size=170

Christophe C.

  • Joined on Apr 02, 2020
  • Unknown

Activity

Commented on Protective Visor by 3DVerkstan 9 months ago
Unsubscribe
Commented on Protective Visor by 3DVerkstan about 2 years ago
by the way I have not seen a lot of such message (and did not yet do myself) : Thanks a lot Erik Cederberg ! I see a big involvement in the modeling as well as a lot of time (and patience) in answering messages. So thanks a lot for that !
Commented on Protective Visor by 3DVerkstan about 2 years ago
Hei ! how is your luck on stacked version from retrolab ? ours are sticking to one another and very hard to separate (for example for the european version with 5 stacked prints). Any advise on how to print stacked and still have easy separation ? (single extruder)
Commented on Protective Visor by 3DVerkstan about 2 years ago
Hei, Is there a version where the face shield is a bit further away from the face. Depending on the shape of the face, this one can be too close, touch the nose and fog up quite quickly. Putting the transparent sheet 3cm further in front would help a lot and probably be a lot more confortable. (probably the 2 branches going on eather side of the head will need to be extended equaly).
Commented on Protective Visor by 3DVerkstan about 2 years ago
pff ... I just see there is a bunch of other comments asking for stacked versions. If there is already a stl file of a stacked configuration, could you please advise which version ?
Commented on Protective Visor by 3DVerkstan about 2 years ago
Hei ! getting some inspiration from prusaprinter (https://www.prusaprinters.org/prints/27267), it would be really good to have stacked prints and be able to leave the printer running for 5 or 10 hours (overnight for example). I guess reducing top and bottom surface could help with detaching the visors and leave a decently smooth surface. Limiting factor would be print time (no more than an overnight print) and filament quantity (usual spools are 750g or 1kg). Please reply if you like the idea.