YouMagine – Contributed photo: 4 Fe87985 Bc97 47 Cc 8 A3 A 4 A793 B92 E5 Cc
Took me two weeks of research, printing, painting and assembly. Remixed a few parts, for higher fidelity and split a few parts to lay flat, to get past some printing issues. Managed to print everything with a 0.4mm nozzle, at layer heights of 0.12 to 0.2. Found assembly of front wheels and forks to the bike to be the most difficult. Suspect the top shaft holder should be at least 1mm thicker, to give deeper sockets to hold the shafts.
Instructions would be very helpful. I don’t think any of the YouTube “make” videos figured out the right way to assemble the front brakes, for instance.