YouMagine – Contributed photo: 20220521 010902430 I Os
Design
Nozzle torque wrench
Printed on
Creality Ender-3
Result
Great result!
Printed with Comgrow Creality PLA 1.75mm / sliced with Cura 5 / 0.2mm height, 0.4mm line width, 100% infill (rotors) @200deg C
Description
Thanks for this - quite very well thought out design.
For others' reference - Calibrated using the wrench+scale method, and after averaging several measurements and accounting for sources of error, I calculated this wrench achieves:
1.3 Nm +/- 10%