£1 Coin Holder

A handy coin holder for your car, pocket or bag (can accomodate the 2017 redesigned £1 coin).


Creative Commons Attribution Noncommercial Share Alike

Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


A handy coin holder for your car, pocket or bag this is a £1 only variant of my x4 Coin Holder. The coin holder will hold 8 (depending on the spring used) £1 coins and is able to accommodate both the original and 2017 £1 coin designs.

Assembly Instructions

1) Place a spring into the coin silo within the 'Base' part.

2) Carefully place the 'Plunger' onto the spring.

3) Apply glue to the bottom of the 'Top' part (the bottom is the side that is not flat).

4) Taking care not to displace the 'Plunger' carefully glue the 'Top' and 'Base' parts together. You may wish to clamp the two parts together in order to ensure a good bond.

5) The coin holder is now assembled.

Materials and methods

-Filament of your choosing

-1Spring . As a guide the specifications of the spring I use within the design are as follows:
Uncompressed Spring Length (mm) - 23
Wire Thickness (mm) - 1
Inside Diameter (mm) - 17
Outside Diameter - (mm) - 19
PRESSURE At 50% Compression (Grams) - 350



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


9b751d7c60d7e4834581c95842d163cd?default=blank&size=40Nikita Pavlov added this to the qqq collection ago
Bfb529b5c5d2513cb1a4db3e12ae3c12?default=blank&size=40Shep published this design ago