Thanks for downloading!
We'd love to hear from you if the print was successful.
1541 Ultimate II+ Tape Adapter Case
Case for the Tape Adapter to match the 1541 UII+ case
Other
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Attribution
Gideon Zweijtzer from 1541ultimate.net
Description
The 1541 Ultimate II+ is a storage solution for the Commodore 64 & Commodore 128 home computers by Gideon Zweijtzer. The main cartridge unit comes with a injection molded case, but the tape adapter does not. These 2 STL files create a snap together (though also has two screw holes) case to match the molded one. This isn't my final design. I sort of got it to snap together and that was good enough for me and I moved on to other projects. If anything isn't right, like if it doesn't fit in the back of the C64 or a real tape adapter edge connector doesn't fit on the protruding circuit board, let me know in the comments.
The 1541 UII+ project can be found here:
http://1541ultimate.net/content/index.php
Materials and methods
This was designed to print with water soluble support (like on the Ultimaker 3). The case top should be printed upside down so the sunken in letters are in the first layer. The case bottom should print upright. I suppose it "could" print fine without support, but I never tried. By turning on the U3 support and using the water soluble filament, the letters came out good on my machine. Your mileage may vary.
Documents
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.