×Read this message from Erik, founder of YouMagine

30 mm E3D-v6 Shroud for PLA

When printing the official E3D-v6 fan shroud in PLA, I was unable to mount it without snapping. So, I designed this model with larger tolerances and without the curve which clips the shroud to the heatsink. This means that it is necessary to use a zip tie to mount the shroud.

3D printer parts and enhancements

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags

Description

When printing the official E3D-v6 fan shroud in PLA, I was unable to mount it without snapping. So, I designed this model with larger tolerances and without the curve which clips the shroud to the heatsink. This means that it is necessary to use a zip tie to mount the shroud.

Find me here: http://progressbychance.com

Documents

Issues

Issues are used to track todos, bugs or requests. To get started, you could create an issue.

Comments

Mini 330px gordon antlions striders coastGordonFreemanPhD commented ago

i just used colorfabb _XT since it 1)can bend around the heatsink 2)can be printed at fairly high speeds without a fan on the heatsink (at 270*C printing at ~eighty something mm/s) 3)it was just what i had handy at the time

Mini prof3Blake O'Brien published this design ago