Adapter for Panasonic LUMIX LX3 hot shoe

for building a remote shutter or time lapse unit by using a model servo


Creative Commons Attribution Noncommercial Share Alike

Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags



The servo is a Micro Servo 99 SG90. 5V-operated digital model servo.

1 knurled head screw M3 x 15 or M3 x 16 mm with a nut.
4 Screws M 2.5 mm x 10 mm.
The strain relief is made for a cable with 4.5 mm diameter.

This is only the adapter, of course you will need some self designed electronics to deliver the PWM-Signal for the servo (microcontroller).

Materials and methods

PLA, 0.3 mm layer height or better. No supports required.

Designed with DesignSpark Mechanical.



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


2c108f78f216d831654657e4c3555cbb?default=blank&size=40Hans W. published this design ago