Thanks for downloading!
We'd love to hear from you if the print was successful.
Advanced Face Shield (Based on the 3DVerkstan Protective Visor)
Printed in 5 small pieces & assembled. Perfect for small 3D-printers.COVID19
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Based on the 3DVerkstan protective visor (https://www.youmagine.com/designs/protective-visor-by-3dverkstan/).
This face shield is designed to be printed in 5 separate components and then assembled using 4 M3x10mm screws. The length of the arms can also be adjusted to fit the user.
For choosing which version to print, as well as for instructions for the assembly of the plastic sheet that goes on the front of the face shield, please follow the instructions provided by 3DVerkstan at https://3dverkstan.se/protective-visor/protective-visor-versions/.
* 1 x Forehead
* 2 x Arm_PartA (One will need to be mirrored)
* 2 x Arm_PartB (One will need to be mirrored)
For more information about this design, please visit http://cronin.cloud/portfolio/faceshield-2-0/
Materials and methods
Designed to be assembled using 4 M3x10mm screws. You may have luck using other screws.