Thanks for downloading!
We'd love to hear from you if the print was successful.
Anycubic i3 Mega Dremel Mount
Anycubic i3 Mega Dremel Mount3D printer parts and enhancements
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
If you've ever wanted to convert your Anycubic i3 Mega into a CNC milling/engraving machine, then this is the part for you! This mount allows you to put the end of a flexible shaft (which you can connect to a Dremel or other rotary tool) on the x carriage.
There are two parts, the base is what you slide into the universal mount (https://www.thingiverse.com/thing:3869322). Secondly, there is the clamp that attaches to the base. You can bolt this clamp whilst holding the end of the flexible shaft in position.
The base has six cut-outs, where you can slide in some M3 nuts. For bolts, I used M3x16mm. If you're wondering, this is the rotary tool I used for this conversion: https://bit.ly/2PqoMuL
If you want to support me for the designs I publish for free, please consider using my AliExpress Affiliate Link (https://bit.ly/2XYWpHW) when buying something from AliExpress. It doesn't cost you anything extra, but helps me out a lot :)
The link in this post is an affiliate link
Materials and methods
I only used support material for the dovetail section of the base (print it with the dremel holder on the printbed, this is the same orientation as in the pictures).
Issues are used to track todos, bugs or requests. To get started, you could create an issue.