Thanks for downloading!
We'd love to hear from you if the print was successful.
ArduinoBot
Built from off-the-shelf components that are readily available and intended to be reusable
Maker/DIY
BSD
A permissive Free Software license that lets this work be widely shared with few restrictions.
Description
ArduinoBot is a low-cost robot created with an emphasis on providing an entry point into the world of electronics, engineering, and software development. ArduinoBot is built from off-the-shelf components that are readily available and intended to be reusable for later projects.
Comprehensive assembly instructions are available at https://github.com/johnny-b-goode/arduinobot.
Materials and methods
Sliced with MatterControl
Printed pieces separately on Robo3d R1+ Using:
Hatchbox 1.75mm PLA
Medium Quality
Standard Layer Height (0.2mm)
Raft
Support
Chased the the holes in the body and top and front of chassis with a 1/8" drill bit.
Chased the front axle hole and rear hex-shaft holes with a #31 drill bit.
Chased the holes for the idler wheels with a #44 drill bit.
Chased the countersunk holes with an 82° countersink
Documents
Edit in 3dslashIssues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
Comments
Jason Lourens commented agoI want to exhibit yourself and tell you about the finest IT development firm that not only helped me to pick good personnel and I also know a lot about the own dedicated development team in the Internet industry. You're handled with respect and I propose that you obtain the right balance of price and quality!
John Tatum published this design ago