#ArduinoBox
###3D printable box for the Arduino
Box for [Arduino](https://www.arduino.cc). This box is designed to *protect our arduino when we carry it in the bag along with other items *. The plate is placed inside the box and has a lid with magnetic closure.
The steps to have the support are the following:
**Step 1: Print the 3D media**
We choose the .STL file from the download section and take it to our printer.
The box you see in the images has been printed with *Cura* Software following the parameters:
Material: ABS Blue and White
Printer: Prusa i3
Laminator: Made with Cura
Temperature: Extruder (Nozzle 0.4) at 240ºC and Bed at 90ºC
Layer height: 0.2mm
Speed: 40mm / s
Plugin: 4 Pause at height {(0.9/25/25/0/5),(2.1/25/25/0/5),(3.2/25/25/0/5),(4.4/25/25/0/5)}
**Step 2: We become a magnet**
Once we have it printed, we will need some magnets. I have used one of the neodymium magnets. These are rectangular of 5x5x1 mm. and we will stick them in the front hinges, in the gap that there is for these.
**Step 3: Place the Arduino inside the box**
Once we have it inside we will have it ready.
Creative Commons Attribution Share Alike
