Thanks for downloading!
We'd love to hear from you if the print was successful.
Beer opener
This is a most simple design of a working beer bottle opener.
Gadget
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
Printing this degisn is quite easy, but you have to return to your printer to add the 5 Eurocent coin.
A quick walkthrough:
1. Start the print.
2. As soon as the printer starts printing the indent for the 5 cents, gently lay it in there. It can be easier if you set the printing speed slower, and wait for the nozzle to be out of the way.
3. Watch your print finish! The coin has enough room in this design to wiggle during the print, this is normal since your nozzle needs some space to push the coin away, so it won't be damaged.
Printer settings:
Standard Ultimaker settings. Fill 20%, Shell thickness: 0.8mm, bottom thickness: 0.6mm.
Materials and methods
PLA
5 Eurocent coin (or coin of the same size)
Edit in 3dslashIssues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
