Thanks for downloading!
We'd love to hear from you if the print was successful.
Business Card Case
Case for standard 2" x 3.5" business cards
Other
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
I designed this for a facebook Husky group (Husky Huddle Malamute Mingle, H2M2) and added another version for a husky rescue (Husky Halfway house, H3).
Also included are a plain case and cutaway case.
It is designed such that the slide is lightly retained in the case. Tolerances are such that business cards hold in place well even when open. It takes a lot of shaking to get them to fall out.
https://i.imgur.com/HhKdyU0.gif
When assembling, you'll need to rotate the slide 90 degrees towards you and put the lower lip into the case before rotating it back and sliding it together.
NOTE:
I will GLADLY add your logo to this design and send you a customized version if you'd like. Just send me an image of your logo. Logos can be embossed or, if its a simple design, cut through the case.
Or you can do it yourself if you know how. Design files on OnShape:
https://cad.onshape.com/documents/d3fe0eadb685c04cb1a4d2df/w/7e490462984671ba1f51524f/e/33bd0d5c1d289b9a1af87002
Materials and methods
I used PETG for the higher glass transition temp. This makes it hold up better if left in a hot car.
Should be fine at any layer height. I used .24mm. Print the case standing upright (flipped 180 deg from STL orientation. sorry) and the slide standing on its side. No supports needed.
Documents
Edit in 3dslash
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
Comments
neverson42 published this design ago