Thanks for downloading!
We'd love to hear from you if the print was successful.
Carbonoid's Hunter Rain-Clik Sensor Holder
A 3D printable holder for the Hunter Rain-Clik sensors3D printer parts and enhancements
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
The holder works for the wired and wireless version of the Hunter Rain-Clik sensor. I designed it to fit on a 30 x 20 mm steel bar. The Fusion 360, IGES and STEP files are provided with the design so you can modify the holder to your needs.
Materials and methods
Print the two parts with high infill e.g. 50% and 0.2 - 0.3 mm layer height. For outdoor use it's recommended to use an UV and heat resistant filament like ASA.
4 x M4 16 mm hex screws
4 x M4 DIN 125 washers
4 x threaded brass inserts (e.g. Tappex Multisert)
After printing insert the threaded brass inserts with a soldering iron into Part A.
Done, now go and mount your Rain-Clik sensor with the holder!
Issues are used to track todos, bugs or requests. To get started, you could create an issue.