<p>Can be used as replacement caps for keyboards, although that's not what this design is meant for.<br>Instead, use it when you make custom keyboards / buttons.<br><br>Cherry MX switches can be bought in numerous electronics component shops, such as Mouser.<br><br>This is a WIP. If you're interested, don't hesitate to comment and give feedback for improvement and further development!</p><p>Mind the orientation when mounting the cap. The oval stem on the cap's inside must match the button's stem. It's easy to spot - if you can't push the button, then you have to rotate the cap by 90°.<br></p><p><br></p><b>Printing instructions:</b><br>Use a 0.4mm nozzle (or smaller).<br>Layer height: 0.06mm recommended.<br>Print slowly, and reduce stringing to an absolute minimum.<br>Print multiple caps at once for improved cooling.
Creative Commons Attribution Share Alike