×Read this message from Erik, founder of YouMagine

Clinometer

This is a simple clinometer that can be used for measuring inclines and declines. Both for navigating and amateur stargazing.

Gadget

    Creative Commons Attribution Share Alike

    Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

    Learn more or download attribution tags

    Description

    This is a simple clinometer that can be used for measuring inclines and declines. Both for navigating and amateur stargazing. Larger marks on the clinometer are for 10 degree increments, and smaller marks are for 5 degree increments.

    Materials and methods

    It requires the printing of the attached parts, a M3 bolt (20mm), nut and washer. Print all the parts with low layer heights (>0.1mm) and slow print speed (>20mm/s) to get the precision needed. Assembly requires no adhesive, and eyepiece/lense fit snugly into clinometer base.

    Recommended Print settings
    Material: PLA
    Temperature: 185 C
    Layer Height: 0.05mm
    Print Speed: 10mm/s
    Top thickness: 2mm

    Documents

    Issues

    Issues are used to track todos, bugs or requests. To get started, you could create an issue.

    Comments

    115d7799301695e7a8509a2adbffad80?default=blank&size=40blsavone published this design ago