Thanks for downloading!
We'd love to hear from you if the print was successful. If you like the design, please consider donating to the designer.
Donate to Marcus WolschonCNC spindle vacuum cleaner attachment V1.7
Attachment for a Kärcher vacuum cleaner to the 1,5KW spindle of a YOOCNC CNC6040. The design is PARAMETRIC, so you can change the diameter of your spindle, of the vac hose, the height and the bolt sizes at will.
Other
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
Attachment for a Kärcher vacuum cleaner to the 1,5KW spindle of a
YOOCNC CNC6040.
The design is PARAMETRIC,
so you can change the diameter of your spindle, of the vac hose, the height and the bolt sizes at will.
Blog-postings:
marcuswolschon.blogspot.de/2012/09/3d-printed-vacuum-cleaner-attachment.html
marcuswolschon.blogspot.de/2012/11/workshop-vacuum-cleaner-attachment-for.html
License is CC-BY-NC-SA
So you may make one yourself and improve the design but not sell the design or made parts and always give attribution.
Instructions:
Combine upper and lower parts using long M5x20 or M5x25 bolts.
Both upper parst connect using some 3mm filament or an M3x10 bolt.
The tubes are slightly tapered.
So you slide them on as until they sit tight.
Then secure the assembly on your spindle using an M5x25 nut and bolt.
Add glue to make things super secure and sealed if you want to.
Documents
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.