Attachment for a Kärcher vacuum cleaner to the 1,5KW spindle of a<br>
The design is PARAMETRIC,<br>
so you can change the diameter of your spindle, of the vac hose, the height and the bolt sizes at will.<br>
<a rel="nofollow" target="_blank" href="http://marcuswolschon.blogspot.de/2012/09/3d-printed-vacuum-cleaner-attachment.html">marcuswolschon.blogspot.de/2012/09/3d-printed-vacuum-cleaner-attachment.html</a><br>
<a rel="nofollow" target="_blank" href="http://marcuswolschon.blogspot.de/2012/11/workshop-vacuum-cleaner-attachment-for.html">marcuswolschon.blogspot.de/2012/11/workshop-vacuum-cleaner-attachment-for.html</a><br>
License is CC-BY-NC-SA<br>
So you may make one yourself and improve the design but not sell the design or made parts and always give attribution.
<br><br><b>Instructions:</b><br><br>Combine upper and lower parts using long M5x20 or M5x25 bolts.<br>Both upper parst connect using some 3mm filament or an M3x10 bolt.<br>The tubes are slightly tapered.<br>So you slide them on as until they sit tight.<br>Then secure the assembly on your spindle using an M5x25 nut and bolt.<br>Add glue to make things super secure and sealed if you want to.
Creative Commons Attribution Noncommercial Share Alike