Cuttlefish Tripod

A foldable camera tripod, that easily can carry a DSLR.

Other

Creative Commons Attribution Noncommercial Share Alike

Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags

Description

A foldable camera tripod, that easily can carry a DSLR.
The screw will to some extent work, but I will highly recommend using a metal screw instead.

Printing:
The screw should be printed horizontally as in file for better strength, and a layer height around 0.1 is adviced for better threads. Support is needed, and support roof is adviced.

Other parts prints fine without support, if orientation from files is used.

Needed parts:
2 pcs m4x20 button head screws. (shorter will work as well)
3 pcs m4x20 countersunk screws.

Materials and methods

Print in PLA or better.

The screw should be printed horizontally as in file for better strength, and a layer height around 0.1 is adviced for better threads. Support is needed, and support roof is adviced.

Other parts prints fine without support, if orientation from files is used.

For assambly you'll need:
2 pcs m4x20 button head screws. (shorter will work as well)
3 pcs m4x20 countersunk screws.

Documents

Issues

Issues are used to track todos, bugs or requests. To get started, you could create an issue.

Comments

Mini md 200x200MakerDane published this design ago