A foldable camera tripod, that easily can carry a DSLR.
The screw will to some extent work, but I will highly recommend using a metal screw instead.
The screw should be printed horizontally as in file for better strength, and a layer height around 0.1 is adviced for better threads. Support is needed, and support roof is adviced.
Other parts prints fine without support, if orientation from files is used.
2 pcs m4x20 button head screws. (shorter will work as well)
3 pcs m4x20 countersunk screws.
Creative Commons Attribution Noncommercial Share Alike