<div>
<p>A super easy and fast tree to print if you just use these settings </p>
<p>Single wall print<br>
Thickness: 0.8mm<br>
Nozzle: 0.4mm<br>
Fill: 0%<br>
Temperature: 220<br>
Speed: 30mm/s<br>
Bottom/Top Thickness: 0mm<br>
Use Spiral function if available </p>
<p>Here is the trick to get a nice clean top of the tree.<br>
Tweak settings for the last 10mm of your print by using the tweak at z pugin in CURA (oh how I love CURA!!) </p>
<p>Speed 50% of original speed (15mm/s)<br>
Lower the temp with 10 degrees to 210<br>
decrease the flow by 10% to 90% of original flow </p>
<p>If you don't alter these settings, most of the time the top of the tree will droop down/inside. </p>
<p>Enjoy your print and merry Christmas!! </p> </div>
Creative Commons Attribution Share Alike
