×Read this message from Erik, founder of YouMagine

Digibirds tree

A large tree for digibird toys.


Creative Commons Attribution Noncommercial Share Alike

Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


I have designed this large tree to mount our digibirds. The tree is printed in several parts and can put together resulting in a 40x40x40 cm object. The only drawback: you need 7 digibirds ;)

The design was made using Fusion 360 and printed on an Ultimaker O+.


Printing suggestions:

- I used colorfabb PLA chocolate brown for the branches and (naturally) leaf green for the leafs.

- The root and supports were printed at 100 mm/s (210 degrees) without support or brim. The large branches I printed using a brim to keep them standing up during printing. The whole tree can be joined mechanically.

- For the leafs I used a brim & supports in order to be able to print them (at 50 mm/s, 190 degrees). They come at several sizes and can be mechanically joined with the knot. However, for the smallest  leafs I finally ended up glueing them together with the knot as the part became to flimsy.



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


Mini abbyhaleAbbyHale added this to the erew collection ago
Mini cameronsnowChinde added this to the Print Ideas collection ago
D9136077f58821f6471452cc0badc847?default=blank&size=40ts52 added this to the toys collection ago
Mini img 4905Marco3D published this design ago