In this project I have designed and made an Acoustic Levitator.
For this project you need;
Lm8uu Linear Bearing (shorturl.at/nANTV)
6000zz bearing (shorturl.at/pvNOX)
10mmX150mm long Bolt and Nut
Arduino Uno (Arduino Sketch is attached with the downloadable files)
OC40K5 Transducer OR The Ultrasonics Sensor hc sr 04 Transducer(TCT40-16T)
Note: I have also attached another stl for the regular transducer, If you have a hc sr 04 Sensor just desold the transducer and use them. If you are using the regular ones than keep the input voltage upto 20 volts)
L298D Motor Driver Module
Boost Module 3-32V 4A XL6009( I tuned mine to 30volts)
Lots of Jumper wire
150x50mmx19mm 2 pieces of Plywood(You can us a box if you want I was being lazy to design a box for it so I just kept it open)
I have also attached the schematic, I took the idea from this article(https://www.instructables.com/id/Mini-Acoustic-Levitation/) and I have added a boost converter for more power.
Support me by subscribing and watch the video.
https://youtu.be/DShi4xtsiTU
Creative Commons Attribution Share Alike
