Thanks for downloading!
We'd love to hear from you if the print was successful.
Door magnet holder for Weber Spirit 210 Gas Grill
A 3D printable door magnet holder for Weber Spirit 210 gas grillsFor your home
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
This is a 3D printable door magnet holder for Weber Spirit 210 gas grills. You may need this if you want to upgrade the Spirit grill without door. You need to order the door and the handle:
1 x part no. 64834 door for Spirit 200 series
1 x part no. 69847 door handle for Spirit 200 series
Materials and methods
Print the holder ideally with a filament that has a high heat resistance. I printed the part in Extrudr GreenTEC, 0.3 mm layer height and 30% infill. You'll also need:
1 x door magnet with a 15 x 40 mm base and ~36.5 mm hole distance
2 x M3 threaded brass inserts (e.g. Tappex Multisert)
1 x M4 threaded brass insert
2 x M3 x 10 mm hex screw
2 x M3 DIN 125 washer
1 x M4 x 8 mm hex screw
1 x M4 DIN 125 washer (or use the nylon washer from the Weber grill which should be left over after the door upgrade)
After printing the holder part insert the threaded brass inserts with a soldering iron. Then mount the holder and the magnet to your Weber grill. Done!
Issues are used to track todos, bugs or requests. To get started, you could create an issue.