Earplug cable storage

Handy way of storing your earplugs safely and tidily


Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


Reversed Engineered and Remixed of "Earplug Cable Tidy- Protects Earplugs And Secures The Cable" by Muzz64 that is licensed under the Creative Commons - Attribution - Non-Commercial license. [https://www.thingiverse.com/thing:819417]


This is a handy way to store your earplug cables tidily. It is also very easy to use:

  1. Thread the end plug through one of the holes
  2. Pull the cable all the way through until the earplugs are inside
  3. Wind the cable around the outside 4.Push the end plug through one of the holes from the outside (see picture)

Please check the attachment for the following files:

-An open source model of FreeCAD [.FCstd]
-STL Model [.stl]
-Images of the printed Model [.jpg]

This model is signed just for fun, but you can easily remove it from FreeCAD file.

Materials and methods

You may print the model using the attached STL file using any Material Extrusion 3D Printers.

This was printed using uPrint SEPlus Material Extrusion printer, with natural white ABS filament. The layer thickness was 0,245mm. Infill was solid. The printing time was approximately 1h 30 min (difficult to say exact times as this model was one of several different designs printed at the same time).



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


Mini il 570xn.1343682359 2jz9The 3D printing Guy commented ago

Thank you! Helpful to keep 3D designs open as it should.

Deedd04085c81d880be3195ff3866a76?default=blank&size=40Thiago Marques de Oliveira Goes Goes added this to the Things to make collection ago
60e5f4717d47b2e78a544913ba136a53?default=blank&size=40ksuutala published this design ago