EMBASE MOTORISÉE ARDUINO ANDROID

https://myhumankit.org/

Avec kit pour piloter deux moteurs DC

Projet en cours d’évolution , le projet pourra être complété ou reconfiguré par d’autres utilisateurs.

" automatic translation"
Project in progress, the project may be completed or reconfigured by other users.

Open, configurable and applicable project on devices with two DC motors

The realized kit is mainly oriented to allow the displacement of a rolling base of a few kilos with the help of a mobile phone.
The motor driver is a BTS7960B DC 43 A, the movable weight then depends on the power of the geared motors.

Characteristics :

• Kit based on Arduino components to check DC motors and vary their speeds using potentiometers.

• Measurements are then used to control the motors at the desired speed using the Arduino program controlled by mobile phone, or by sensors for a robotic movement.

• The kit is on a clipping foot, so it is quick to move from one device to another.

• Power range: The motor driver is a BTS7960B DC 43 A

Clip-on foot:
Support option is not necessary in the print settings but the top of the recesses tend to sag on the first layers, it may be necessary to sand the male and female feet slightly before assembly.
To dislodge the foot, lightly press the tab of the male foot at the recess of the female foot.

The whole project and in download tab.