Fan Base UM2

UPDATE: I added the 4 holes missing for the right fan. Improve the quality print of the OEM fan base.

Creative Commons Attribution Noncommercial Share Alike

Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags

Description

Design inspired in: https://www.youmagine.com/designs/fanduct-another-idea

But the air flow is more focused towards the nozzle.

Feedback is more than welcome.

Materials and methods

Uses the OEM fans and screws.

Documents

Fan Base Zetoff V3
STL – 4.1 mb
Version 1 - Apr 01, 2016
Updated on 01-04-2016 – 2:29 h – 15 g – 83×38×36 mm
Edit in 3dslash
Version 1 - April 01, 2016 12:38
Download

Issues

Issues are used to track todos, bugs or requests. To get started, you could create an issue.

Comments

MacMA added this to the Steffen collection over 3 years ago

Romulus Curtuzan added this to the Parts collection almost 4 years ago

M.Schubert added this to the Ultimaker 2 collection over 4 years ago

wowowaa added this to the Ultimaker collection about 5 years ago

kesjeff added this to the Ultimaker collection over 5 years ago

Neil Watts added this to the Ultimaker² collection over 5 years ago

blazewynn added this to the UM Stuff collection over 5 years ago

sungam94 added this to the stuff collection over 5 years ago

Michiel commented almost 6 years ago

Another derivative of my design :)

Jo Cleykens added this to the KAB collection almost 6 years ago

pmdude commented almost 6 years ago

A few layers may be needed. I've seen people using 7-8 layers for fan base covering entirely the nozzle.

drofnas commented almost 6 years ago

I've been thinking about getting some kapton tape recently, would a single layer of tape be enough, or would I have to use multiple like you did with the aluminum paper?

pmdude commented almost 6 years ago

I printed it in PLA with a small heat shield. You can make one with aluminium paper. I folded 4 or 5 layers and placed it around the sides in the opening of the nozzle. Otherwise you can use kapton tape.

drofnas added this to the Printer Upgrades collection almost 6 years ago

drofnas commented almost 6 years ago

Curious what material you used to print this and how has it held up so far? Right now I only have PLA, but wasn't sure if this was fine, since it doesn't stand up to heat very well. Maybe I should get some Colorfabb XT filament, or similar, that can withstand greater temps?

vegasracer added this to the Other stuff collection about 6 years ago

Joakim Andersson printed this over 6 years ago

Printed on:: Ultimaker - The Ultimaker 2
Result:: Very good results!

Daniel Watson printed this almost 7 years ago

Printed on:: Ultimaker - The Ultimaker 2
Result:: Excellent result, though because it was made with the original fan housing the right hand side isn't perfect - I will be making a new fan housing, using this new fan housing, so hopefully it'll be a final version!
Feedback:: Zetoff fan housing, printed on UM2 with standard fan housing.

Corwell Customs printed this almost 7 years ago

Printed on:: Ultimaker - The Ultimaker 2
Result:: so far so good...
Feedback:: used and aluminum can as heat shield... will see how it goes... -Ryan #Corwellcustoms