Thanks for downloading!
We'd love to hear from you if the print was successful.
Fan support + fan shroud for Pico Hotend
Fan support for the active refrigeration fan of the Pico Hotend which also adds a place for a second fan to cool the part while it is printed (useful for PLA).3D printer parts and enhancements
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Print it (you'll need to change the orientation / rotate, and also use support). I printed with 0.2mm layer height, seems to work!
When you stick the fans (both 30mmx30mm) on the support, it is very likely they won't fit very well because the side of one will obstruct the side of the other. I could not make them further apart because otherwise they would be very inefficient. So I sanded these sides so they could fit.
You can use only 2 of the four holes for the 3mm screws, it will work.
Materials and methods
You will need:
- pico hotend
- two 30mmx20mm fans
- four or eight m3 screws to fix the fans in place. You might need to sand the sides of the fans so they can fit.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.