Thanks for downloading!
We'd love to hear from you if the print was successful. If you like the design, please consider donating to the designer.
Donate to MakeThings3DFlexbank Case
The small Power Pack!
Gadget
Creative Commons Attribution Noncommercial No Derivatives
Commercial use is not allowed nor can you remix or change this work & you have to attribute the creator.
Description
German:
Dies ist ein Gehäuse für die Flexbank F1 von Nitecore.
Es bietet Platz für 3x 18650 Akkus, sowie für die Flexbank mit eingelegtem Akku.
Des weiteren ist im Gehäuse eine Aussparung integriert für den USB Ausgang somit ist es möglich auch bei eingelegter Flexbank im Gehäuse Geräte zu Laden.
Für die Status Anzeige der 3 LED ist ebenfalls eine Aussparung vorhanden.
Und für den mit gelieferten halte Gummi für die Flexbank ist auch im Deckelfach Platz
English:
This is a Case for the Flexbank F1 from Nitecore.
It has enough Space for 3x 18650 Battery packs, and also for the Flexbank with mounted Battery.
Also has it a hole for the USB output, that makes it possible to charge your devices with mounted Flexbank in the Case.
And last but not least has it a hole for the 3 Status LED, and for the supplied Rubberband is in the Cover also Space.
Teile die benötigt werden/ Parts you Need:
Flexbank F1*:
http://amzn.to/28ZR1NK
18650 Battery*:
http://amzn.to/2997Seb
*Amazon Afiliate Link
Materials and methods
Teile die benötigt werden/ Parts you Need:
Flexbank F1*:
http://amzn.to/28ZR1NK
18650 Battery*:
http://amzn.to/2997Seb
Filament: PLA
Print in original Orientation and you need no Support!
*Amazon Afiliate Link
Documents
Edit in 3dslash
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
Comments
Xander added this to the Interesting collection ago
MakeThings3D commented agoYou need no support! Its a 45 degree chamfer on the inside of the compartment.
My Print settings that i youse was
0.25 layer hight
20% infill
0.4 nozzle
0.8 Wall thickness
and no support
Reiner Bühl commented agoNice and very useful design! Do you have any advice for the print settings of the lid? Does it need support to print the top of the rubber band compartment correctly?
Reiner Bühl added this to the Things to Make collection agoMakeThings3D published this design ago