FLSUN QQ-S / QQ-S PRO SD Relocation Adapter

Allows mounting MKS SD adapter

3D printer parts and enhancements

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


This adapter allows you to mount an MKS Slot2 SD card Extender into the shell of the QQ-S / QQ-S PRO.

Materials and methods

- Cut a 3mm x 40mm slot in the shell (I used a dremel with a cutting wheel, and a shop vac while cutting to extract all the metal dust)

- Bolt the two support parts to the MKS Slot2 board using (2) M3x ~14mm bolts

- Bolt the face plate to SD assembly through the 3mm x 40mm slot using (2) M3 x ~8mm bolts

- Connect ribbon cable to control board header. No firmware mods needed.

- Enjoy!



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


Bff4fc18b76df7d4c77950dca6aa4a55?default=blank&size=40Jacob R added this to the FLSUN collection ago
E376464ad74155a5b1661ace9f80c5b8?default=blank&size=40Matgyver published this design ago