Thanks for downloading!
We'd love to hear from you if the print was successful.
Foam Dart Gun (Nerf compatible)
Foam darft Gun with mechanical loading which is compatible for regular Nerf darts
Toys
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Attribution
https://www.thingiverse.com/thing:16726
Description
This 3D printed foam dart gun is super fun to use and reliable in every airsoft battle.
It has a range close to 90 ft. and is compatible for regular Nerf darts.
The toy gun has a nice pullback loading mechanism which gets back in place automatically.
I printed all parts in PLA. ABS should be fine too.
Have fun but please don`t hurt anybody.Do not fire foam darts on anybody. People can get hurt.
The toy gun has no mechanism preventing non-foam items from being propelled from the barrel. That`s why you shouldn´t give it to kids!
Shooting Test of the foam dart gun:
00:00-00:12 slow motion shot on a waterbomb
00:12-1:11 speed assembling
01:11-1:18 long shot
01:18-01:35 can precise shot
Materials and methods
Springs
Main Spring: length:73,5mm; outer diameter:14mm; wire:1,5mm
Trigger Spring: length:30mm; outer diameter:10mm; wire:0,8mm
Catch Spring. length:16mm; outer diameter:8mm; wire:0,63mm
Pipe
lengh 95mm; outer diameter 26mm; inner diameter 19,5mm
Screws
Piston Screw: length:16mm; diameter: 3mm
Trigger Screw: length:8mm; diameter: 2,5mm
Back Screw: length:6mm; diameter: 2,5mm
2x Rubber ring:
diameter: 25mm
sealing ring:
outer diameter 20mm; inner diameter 10mm
Some oil for the sealing ring
All non- non- printable parts in one pack:
https://www.ebay.de/itm/114712042527
Here you can find the youtube video on how to assemble the gun:
https://www.youtube.com/watch?v=jIdk0Nr9jQ0&feature=emb_imp_woyt
Printer: Anycubic Mega X
Filament: PLA
Barrel, Back, Slice, Handle:
Resolutuin 1,5 - 3 mm
Iinfill 50%
Support overhang angle 60°
Catch, Front, Piston, Piston Head 1/2, Trigger, Trigger Support:
Resolution 1,5 - 3mm
Infill 100%
Support overhang angle 60°
Printing time:
With my Anycubic Mega X the printing time is close to 21 hours
If you place the 3D modells correctly, there istn`t that much support to remove. I recommend using a cutter nive and a pliers.
Documents
Edit in 3dslashIssues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
