Fourth Arrow Hunting Camera Mount

3D printed replica of the fourth arrow hunting camera mount for a trail cam

Other

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags

Attribution

https://fourtharrowcameraarms.com/shop/10-pack-fourth-arrow-stiffcarbon-arm-bases/

Description

3D printed replica of the fourth arrow hunting camera mount for a trail cam. The design was improved by adding spacer supports for easier assembly. All parts can be printed using PLA. A piece of webbing is needed to secure to the tree and two bolts with nuts are used to hold the design together.

Designs were created using FreeCad. FreeCad is an open-source 3-D cad package that can be downloaded for free. The FreeCad files can be found on appropedia.

Materials and methods

Print Parameters:
-Layer height: 0.2mm
-Shell thickness: 1mm
-Bottom/top thickness: 1mm
-Fill density: 50%
-Print speed: 120mm/s
-Support type: none

All parts can be printed at the same time, but the 77mm cylinders have to be in the middle of your printbed.

Material: PLA

Additional Materials
Belt ~ 4 ft
2 - 5 1/2" Carrige bolts with nuts

Documents

Issues

Issues are used to track todos, bugs or requests. To get started, you could create an issue.

Comments

265e54786579db489808fdbe7c1b472a?default=blank&size=40remichae published this design ago