Thanks for downloading!
We'd love to hear from you if the print was successful.
A printed autogyro 60cm head.Other
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
The gyroprint has autogyro head printred in abs or pla.
The head can control roll and pitch. The rotor diamètre is 60cm.
Blades are also printed and covered with thermoplastic film for example.
Materials and methods
ABS and some screws
2 bearings 3x7x3
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
- Printed on:
- Creality Ender-3
Je ne me souviens plus trop du comportement des pales pleines, apparemment en voyant le video les ajourées marchaient bien.
Il me semble que les pleines étaient plus fines et donnaient plus de rotation. En tout cas pour l'indoor ça risque d'être compliqué quelles ques soient les pales.
quelle différences entre les pâles à entoiler et les pâles pleines?
L'une pour l'indoor et l'autre pour les vols en exterieur?
Merci pour ta réponse
Have few questions; Any info on the rudder/elevator and the power system including the pre-rotor? I am going to try printing this soon. Thanks
Thank you for the great design!
I need to figure out the angle of the whole rotor head to tilt backward and
also the CG, my first autogyro using balsa crashed on its first try caused
my wrong CG. I can experiment with it but if you have the data ready , can
you please share with me please?
Thanks for your message.
I just upload the hub and the last blades I used bettre than the first version.
Hi, Love this design. I'm trying to print but I found missing parts? the green color control horn adapter STL not shown . can you please upload it? can you please let me know how many angle the rotor head need to tilt backward?