Thanks for downloading!
We'd love to hear from you if the print was successful.
Hot Glue Stick Holder
Hot Glue Stick HolderMaker/DIY
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
This hot glue stick holder holds 10 hot glue sticks (max diameter is ±12mm) and can be mounted horizontally (for example, underneath a shelf) and vertically (for example, to a wall or closet door). For horizontal mounting, print the glue_stick_open.STL file (this one can be seen in the picture). When you want to mount this part vertically, print the glue_stick_closed.STL file.
The second image is a technical drawing of the open glue stick holder with all the necessary measurements included. The closed version of this part has a 2mm thick bottom, which means that the depth of the holes is 48mm, instead of 50mm.
Mounting the holder can be done with four small screws. Dimensions for these screws can be derived from the technical drawing.
If you want to support me for the designs I publish for free, please consider using my AliExpress Affiliate Link (https://bit.ly/2XYWpHW) when buying something from AliExpress. It doesn't cost you anything extra, but helps me out a lot :)
Materials and methods
Issues are used to track todos, bugs or requests. To get started, you could create an issue.