<p>I was asked to upload these files, so here they are:)</p><p><br>I recommend to first put the 10 coils on the Led_ring with whatever kind of wire you want. Maybe even glue them on. After that put the leds in the Led_ring, then put the Disk over the the LEDs, and solder the resistors to the LEDs. After this you can put the LEDs into Led_core and glue this to the Disk.</p><p>From now on assembly should be straight forward, with the use of superglue you should be able to complete the model!</p><p>For a cool 'Afterglow' effect, Print the Led_ring, Disk and Led_core with glow-in-the-dark plastic.</p><p><br>There's space for a 9 volt battery block in the Lower_frame. I use it with a 9 volt wall adapter, because i use it as a night light!</p>
Creative Commons Attribution Noncommercial Share Alike
