×Read this message from Erik, founder of YouMagine

Kitchenaid <-> Pasta Roller coupling and spaghetti blocker

A coupling to use a Kitchenaid mixer to power a Marcato Atlas pasta maker, and a spaghetti blocker

For your home

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


Based on original design: Kitchenaid <-> Pasta Roller coupling by Dave Z


This remix of this nice design (https://www.youmagine.com/designs/kitchenaid-pasta-roller-coupling) add a 3d part to block the spaghetti maker because it tend to move and unlock with an unbalenced weight.
There are no changes on the 2 originals parts.

Original description:
I love my Atlas pasta maker, but it really takes three hands to make it work -- one to feed sheets of pasta in, one to guide sheets out, and one to crank. There are mounting holes on the side of the pasta maker to attach a motor, but rather than buy a separate part, I figured I'd use my KitchenAid mixer.

(KitchenAid does sell a pasta maker attachment, but I already owned the hand-cranked version, so spending $200 seemed unnecessary.)

There are two parts to print: the sleeve and the shaft. I printed the sleeve with 25% infill, and that seems just fine. I printed the shaft with 50% infill, and will report back on how that holds up. Ultimately, it may need to be more like 100%, or even made of metal.

After printing the two parts, add screws to the sleeve (you may want to/have to drill out the holes to make it easier). Then attach the sleeve to your pasta maker, insert the shaft, and attach the whole thing to the mixer. Use the screw on the side of the mixer to hold the coupling in place. The coupler also works with the pasta cutters (for fettuccine and spaghetti), as they have the same motor mounts.

If you're working with longer sheets of pasta, it's helpful to remove the base of the pasta machine (so the sheets can hang down further without hitting anything). Happily, there are just four screws that hold the base on, and they're easily removed. (They're equally easy to replace, to return the pasta maker back to regular use.)

You can see a video of this in action here:

Materials and methods

Materials and methods
- 2x small (maybe #6 or #8) wood screws
- 1x printed sleeve. Round it a little bit
- 1x printed shaft
- 1x printed spaghetti blocker if you have the spaghetti maker



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


9c8e929e536427950e0b6da5f47537fa?default=blank&size=40cbrownell7@yahoo.com added this to the Kitchenaid collection ago
947893ac57fe6c521314c31e5da188f2?default=blank&size=40Johannol published this design ago