Thanks for downloading!
We'd love to hear from you if the print was successful.
Knife-shaped Key Holder
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Materials and methods
Look also at the new version https://www.youmagine.com/designs/knife-shaped-key-organizer
There are two versions of the key holder.
The first version is for up to nine keys and the second version for up to five keys.
Parts for version one :
1x key holder_1.stl , 1 x key holder_2.stl , 2x standoff_9 keys.stl , 1x locking disc_9 keys.stl , 1x keychain.stl and spacer.stl to prevent the rattle if less than nine keys are installed (For example 2 spacer if you only have seven keys).
3x M3x20 countersink screw (DIN 965) , 3x M3 locknut , 1x M3 washer.
Parts for version two :
1x key holder_1.stl , 1 x key holder_2.stl , 2x standoff_5 keys.stl , 1x locking disc_5 keys.stl , 1x keychain.stl and spacer.stl if needed (For example 2 spacer if you only have seven keys).
3x M3x14 countersink screw (DIN 965) , 3x M3 locknut , 1x M3 washer.
The part key holder_1.stl needs support.
I printed key holder_1.stl and key holder_2.stl with HDglass from Formfutura and 0,175 Layer height, for the standoff and the locking disc I used ApolloX from from Formfutura but you can also use ABS.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.