First appeared on Thingiverse by mnis, published May 13, 2018Maker/DIY
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Three simple variants of remote control holders.
And many types of plastic cards (credit cards, etc.) fit in these holders :-)
You need a holder for a thicker or higher remote, then use the scaling function of your Slicer for minor adjustments.
How I Designed This:
That's why I've made simple remote control holders in three variations:
There are more and more, these little flat remote controls for all sorts of LED gadgets. Remote-controlled LED lighting is available in so many variations for home, car, camper, boat or whatever. But what almost does not change at all ... these small remote controls in the same format of: 7x52x85mm. Sometimes they are a bit thicker and a bit higher, but almost always these things are lying around somewhere and you have to look for them first. So why not finally determine a permanent place for these remote controls?
Issues are used to track todos, bugs or requests. To get started, you could create an issue.