Thanks for downloading!
We'd love to hear from you if the print was successful.
LeopardQR 34x34x42 cm 3D Printer
Cartesian Easy to Scale 3D Printer3D printer parts and enhancements
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Because the markdown seems not to be working please see https://www.thingiverse.com/thing:2423066
With a frame of 500x500x520 mm has a build volume of 340x340x420 mm.
Calibrating Print Video
The provided here gantry carriage is only for OpenBuilds VSlot.
Needed only 4 rails of OpenBuilds - the rest can be any cheaper 2020 profiles. Close to Spain this one is perfect.
Take the columns 20 mm longer than the screws to get the max of the vertical travel.
The three screws need to be straight: if one does not roll fine on a flat surface then do not use it: Pure Screw Z Stage
Mount the screws to the lower rails, not like in my photo (to the upper rails).
For the cross carriage take a cheap but very good hotend:
Dual DeerArc or Solo TurtleArc
The file TJoint2020.stl needed if not using slot profiles for the Z stage, otherwise can use regular corner items and save on printing.
The best, IMHO, open source extruder SaintFlint
Except the extruder I print all my printer and robot parts wit a 0.8 nozzle out of PETG and the screenshots of the settings are provided.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.