<div><p>"... Jingle bell rock; Jingle bells swing, and Jingle bells ring; Snowing and blowing up bushels of fun; Now the jingle hop has begun..." </p><p>Print out and ring in the Season with these fun little bells! This clever design incorporates a working print-in-place Clapper- way more fun than another whistle ;) </p><p><br></p><p>Slice with 2 shells (/perimeters) and 0% infill. At coarse resolution (~0.25mm), you will find prints have extra shimmer (and print quicker!). Created in stunning Faberdashery Bling Bling Gold PLA. Each bell requires ~4g of material (<1m of 3mm / 1.75mm filament). Because of the small features (internal clapper), we suggest printing multiple bells to allow sufficient cooling per layer. A classic Ring-of-Bells plated version is provided. You may need to carefully poke a pin through the sides to release the clapper. Just attach some decorative twine to finish.</p></div><div><br><br></div><div>Faberdashery are releasing daily, seasonal designs for you to print and enjoy. Join in the fun with our 25 Days of Making!<br><a href="http://www.faberdashery.co.uk/25-days-of-making/" target="" rel="">http://www.faberdashery.co.uk/25-days-of-making/</a><br>This is Make #9 of 25. </div>
Creative Commons Attribution Noncommercial Share Alike