Micro Mesh Pad Holder
90° of postprocessing 3D prints is sanding. Lots of sanding. Lots of grits. Lots of dirty, wet pads around the table.Maker/DIY
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
This is a modular holder design for a full sets of
* Micro Mesh mini sanding pads,
* Micro Mesh Mini MX (down to 150MX),
* Micro Mesh regular sanding pads,
* 2x2 bottles of Mr.Putty filler with brushes
to let them dry and keep them sorted, organized and even comparable between MX and MM pads!
This keeps the tools for post-processing 3D prints organized.
The pads and brushes dry well, are sorted in order of grain and don't leave everything on your table dirty with fine dust.
Make all the parts you need and simply lock them into each other.
The keys are designed with +0.5mm allowance in each direction. So they do have a tiny wiggle room. This is intentional as not all printers out there have perfect dimensional accuracy.
The symbols mark roughly equivalent values for standard and MX pads for easy reference. MX pads are made of a harder material, so the numbers cannot be compared.
The Geomagic/Alibre files are parametric, so you can adapt the sizes to other bottle sizes or make modules for holding an airbrush or an array of sanding linen or -paper.
Materials and methods
no additional parts required.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.