Mini 608 Bearing Low Friction Spool Holder (For Extrusion Mounting)

Spool holder to mount on 20x20 extrusions (Misumi, Openbuilds, Etc)

3D printer parts and enhancements

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


I know I have seen something similar before... I just forget where.


Low Profile, Low Rolling Resistance, Easy to Print, Spool holder that mounts to extrusion. I use it on my Talos3d Tria Delta Printer. Works well feeding up into a Bondtech extruder mounted further up on the extrusion.

Materials and methods

Print the STL which includes all the parts already plated in the correct orientation. You will also need:

One(1) - M5x12mm Socket Head Screw
One(1) - M5x30 Button Head Cap Screw
Two(2) - Extrusion T-Nuts
Three(3) - 608 Skate Bearings.

You can also put a little felt on the underside of the upper guide. Then the top ring of the spool can slide on that felt and create some artificial resistance. This is helpful if you have very stiff filament that likes to unravel with low resistance spool holders.



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


E0c4170fb5f21543aa038cdd6cc44f3b?default=blank&size=40Макс Белый added this to the Things to make collection ago
Mini untitled 1Eric Lien published this design ago