MP Mini Delta 3D Printer Profile
This is a profile for Cura 3.4 for the MP mini delta.3D printer parts and enhancements
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
This is a simple way of using the newer version of cura 3.4 with the monoprice mini delta.
All you have to do is the following 4 Steps.
1 - Download all the files.
2 - Unzip the MP-Delta-Profiles.zip file
2 - Copy thefolders "definitions, meshes & quality" file in the "C:\Users\ur-user-here\AppData\Roaming\cura\3.4\definitions" directory, take note "ur-user-here" should be replaced with your own user.
3 - Proceed to add a printer on cura using the other tab.
A short description is as follows.
1- Strong-Quality-1.curaprofile = 100% infill, coarse quality and 3 walls. .3mm layer height. 60mm/s
2 - Extra-Fine-Quality - .05mm layers, 25% infill 2 walls. - 30mm/s
3 - Fine-Quality = .1mm layers, 25% infill, 2 walls - 40mm/s
4 - Draft Quality = .2mm layers, 25% infill, 2 walls - 60mm/s
5 - Coarse Quality - .3mm layers, 25% infill, 2 walls. 60mm/s with 80mm/s infill.
Materials and methods
Issues are used to track todos, bugs or requests. To get started, you could create an issue.