Thanks for downloading!
We'd love to hear from you if the print was successful.
MPCNC universal mount holder for 52mm spindle
Universal mount holder for generic 52mm spindlesMaker/DIY
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
This is a tool holder for HivWic's universal mount at www.thingiverse.com/thing:1234989; It takes a generic Chinese 52mm spindle or anything else that looks like a cylinder with a diameter of 52mm.
I designed this to be ... solid :)
After printing the fit with the mount will likely be pretty tight, so it will need a bit of sanding/filing and breaking in (I keep an older universal mount print for this, just hammering the mount in and out a bunch of times will erode the high spots and make it slide in reasonably easy.
Materials and methods
Printed parts: PLA with 50% cubic infill
6 M4 nuts (either regular or lock nuts)
6 M4 x 20 or M4 x 25 screws (whatever you can find as long as it has a round head
Issues are used to track todos, bugs or requests. To get started, you could create an issue.