<div>The Nefertiti model inspired by the blog post and Youtube video from RichRep (Richard Horne) <a href="http://richrap.blogspot.nl/2016/03/3d-printing-and-finishing-nefertiti.html" target="_blank" rel="nofollow">http://richrap.blogspot.nl/2016/03/3d-printing-and-finishing-nefertiti.html</a>
</div><div><br></div><div><a href="https://www.youmagine.com/designs/nefertiti-in-sections-up-for-3d-printing-full-sized" target="_blank" rel="nofollow">https://www.youmagine.com/designs/nefertiti-in-sections-up-for-3d-printing-full-sized</a>
I had to cut the model into 11 pieces so it fitted my 3dprinterlab.org standard Prusa i3 (200 X 200 Y 220 Z build space), printed with a 0.4 mm nozzle.
After printing the parts I filled them with plaster and glued them together with epoxy. Then I sanded down the joint and gave it a coat of Zinc primer and sanded down the model very lightly to preserve the 3d printer artifacts. Finally I gave the model 3 coats of golden spray paint.</div>
Creative Commons Attribution Share Alike