Thanks for downloading!
We'd love to hear from you if the print was successful.
Netgear GS608 Wall Mount
Wall mount bracket for Netgear GS608 Switch
Other
Creative Commons Attribution Share Alike
Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
Description
Just a simple wall mounting bracket for a Netgeat GS608 switch.
I've included three variations of this part.
The version I printed is the original, but I made a slight change after realizing how snugly my design holds the switch. I added a hole on the bottom that you can use to push the switch back out once its in there. (Removal Hole)
The third variant (probably the best one to use) has a flattened bottom to work better with FDM printers. This version has the push hole as well. (Flat Bottom)
I cant get the 3d view to work properly for some reason. :(
Materials and methods
Dont print with too fine of a layer height or the layers may fail on the cross support on the front of the bracket.
I used 2.4 mm layer height on an Ender 3 to print mine. (My printer is clearly having some issues as seen in the pics)
You may need to add supports touching buildplate for the lower corners. Use your best judgement.
Mounting holes are 2" x 2". Designed for use with #10 screws, but anything that fits should be fine
Documents
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.