<p>There is 1 file for a single colored box, and one file for each color of the dualcolored box.<br></p><p>The bottom and lid of this heartshaped box are connected with a
filmhinge so you cannot loose the lid. It snaps shut with a little
twist. <br>
I made some slight changes to get an easier snap . They are in heartcontainer fdm filmhinge4.stl </p>
<p>This was printed in PLA on a prusa mendel. I am very curious how this
will print on other types of 3dprinters so please let me know your
results. <br>
the size for printing is 164 x 147 x 33 mm <br>
The closed box is 100 x 100 x 35mm <br>
Sofar I have seen very nice result from makerbots even scale down to 0.6 the hinges work great. </p>
<p>for the single colored box I used Slic3r with concentric infill for bottom, <br>
bottom layer 0,4mm <br>
next layers 0,3mm On a Prusa 2 with 0.5mm nozzle<br></p>
<p>To get good filmhinges it will help if you have a concentric first
layer infill, have a nicely printed first layer and carefully remove the
print from the bed.</p><p>For the dual colored box I used Cura 13.12 with a wipetower. The oozeshield didn´t work well with this design. first layer 0,25, other layers 0,15mm. Printed on a mowi printer with two 0,35mm nozzles.</p>
Creative Commons Attribution Share Alike
