Thanks for downloading!
We'd love to hear from you if the print was successful.
OpenBeam Kossel Pro Foot Mount
A mount for 38 mm diameter rubber feet.3D printer parts and enhancements
Creative Commons Attribution Noncommercial Share Alike
Commercial use is not allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.
If you want to have solid rubber feet attached to your OpenBeam Kossel Pro you can print you three of these mounts and attach them together with three 38 mm diameter rubber feet to your printer.
Materials and methods
Print three times the STL file with a high infill rate. I used PETG filament with 66% infill to get really solid parts. You will also need:
- 3x M6 threaded brass insert
- 3x 38 mm rubber foot
- 3x M6 x 20 mm hex screw
- 3x M6 spring washer
- 12x M3 x 8 mm hex screw
- 12x M3 washer
- Install the brass inserts wit a soldering iron in the printed parts.
- Screw the rubber feet onto the printed parts using the hex screw and a washer ring per foot.
- Install the assembled feet to your OpenBeam Kossel Pro with 4x M3 x 8 hex screw + 4x M3 washer per foot.
Issues are used to track todos, bugs or requests. To get started, you could create an issue.