ordbot z axis endstop mount

A mount for a microswitch endstop

3D printer parts and enhancements

Creative Commons Attribution Share Alike

Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.

Learn more or download attribution tags


A mount for a microswitch endstop for my Ordish Bot. Mount to the Makerslide with an M5×8 bolt and T-nut, mount the microswitch with two M2.5×12 bolts and nuts.

The microswitch I'm using has the holes 10mm on center.

I printed in ABS with 0.2mm layer height and a 0.4mm nozzle. My infill was set at 20% but it printed solid because of the size.

Materials and methods

- one M5×8 bolt and T-nut
- two M2.5×12 bolts and nuts
- one 10mm×20mm microswitch



Issues are used to track todos, bugs or requests. To get started, you could create an issue.


E855daaa00370bcb1210affa1df75e0e?default=blank&size=40gjbroom commented ago

V2: increase width of "keel" to better match T-slot, add support so it doesn't break apart at the 5mm hole.

E855daaa00370bcb1210affa1df75e0e?default=blank&size=40gjbroom published this design ago