Finally, a D8 you can print with reasonable quality without support material!
This model is fully parametric and can be generated/changed using OpenSCAD. Parameters that can be changed include:
* Corner/edge rounding
* Depth of lettering
* Font size
* Ordering of numbers
* Numbering style (Arabic numbers, Roman numerals, Braille, etc.)
It's all documented in the OpenSCAD file. The STL file is generated from those initial parameters and is sized at a 6" diameter - feel free to scale to whatever size you want.
As for the text, most D8 models out there (which don't use pips instead) have text which is inset perpendicular to the die's faces. However, this creates unsupported overhangs which make them difficult and/or impossible to print without support material. Most open source CAD programs do not have the ability to bevel text without a lot of manual tweaking of edge bevel insetting. This model hacks around that by using progressively inset/outset stepping, which means that its text is far easier to print by simulating a proper bevel. And because it's done fully parametrically using OpenSCAD, you can easily change the font, numbering type (Roman numerals, etc.), or other parameters without messing up your edge bevel distances and having to manually rebevel.
This design was based off of my previous Parametric Easy-Print D6 design (<https://www.youmagine.com/designs/parametric-easy-print-d6>) and was adapted to a D8 for a request from commenter WisemanFair on my D20 design. Please pardon the code quality - the original D20 was whipped up in a matter of a few hours, and this adaptation was slapped together in even less time.
Other dice in this series include:
* Parametric Easy-Print D6 <https://www.youmagine.com/designs/parametric-easy-print-d6>
* Parametric Easy-Print D8 <https://www.youmagine.com/designs/parametric-easy-print-d8>
* Parametric Easy-Print D20 <https://www.youmagine.com/designs/parametric-easy-print-d20>
Creative Commons Attribution